COLOR DOME CAMERA
User Guide
16
COLOR DOME CAMERA
User Guide
17
Installation
1
8
8
1
No.
Line Color
Camera to Power Supply
Power Supply to Receiver
1
White+Orange
VIDEO (+)
CH1
VIDEO (+) / RS-485 (+)
2
Orange
VIDEO (-)
VIDEO (-) / RS-485 (-)
3
White+Green
RS485 (+)
CH2
VIDEO (+) / RS-485 (+)
4
Blue
POWER (-)
VIDEO (-) / RS-485 (-)
5
White+Blue
POWER (+)
CH3
VIDEO (+) / RS-485 (+)
6
Green
RS485 (-)
VIDEO (-) / RS-485 (-)
7
White+Brown
POWER (+)
CH4
VIDEO (+) / RS-485 (+)
8
Brown
POWER (-)
VIDEO (-) / RS-485 (-)
UTP CABLE
The camera uses UTP cable for transmitting video signals, power and transferring RS-485 control
data.(TIA/EIA-568B)
• Using the product with third-party UTP peripherals may result in degradation of product
function and performance.
• Attenuation and distortion in signal may occur if the maximum transmission distance is
exceeded. Please note that depending on the installation environment/condition, the
signal may become attenuated and distorted and cause the camera to function
incorrectly even when the transmission distance is within the maximum.
• If using RS-485 communication please use the SAMSUNG-T, SAMSUNG-E, PELCO-D,
PELCO-P, BOSCH, HONEYWELL, VICON and PANASONIC Protocol.
• If you are using the 1Ch Passive Receiver system setup, please connect the adapter
(AC 24V or DC 12V) directly to the camera.
Notes
No.
Line Color
Camera to Power Supply
Power Supply to Receiver
1
White+Orange
VIDEO (+)
CH1
VIDEO (+) / RS-485 (+)
2
Orange
VIDEO (-)
VIDEO (-) / RS-485 (-)
3
White+Green
RS485 (+)
CH2
VIDEO (+) / RS-485 (+)
4
Blue
POWER (-)
VIDEO (-) / RS-485 (-)
5
White+Blue
POWER (+)
CH3
VIDEO (+) / RS-485 (+)
6
Green
RS485 (-)
VIDEO (-) / RS-485 (-)
7
White+Brown
POWER (+)
CH4
VIDEO (+) / RS-485 (+)
8
Brown
POWER (-)
VIDEO (-) / RS-485 (-)
Copper Connector
UTP Coating
The SUD-2080 uses UTP cable to receive its power (AC24V/AC28V) from the Power Supply.
Therefore, a separate adapter is not required. Please refer to the RJ-45 Connector Schematic
Diagram.
RJ-45 Connector Schematic Diagram
