Samsung SU3364, User Manual

Page: 8 / 16

8_ operating the cleaner
Operating the cleaner
pOWER SWITcH
The Power Switch is located on the side of the vacuum.
Push the rocker switch “ON” to vacuum, and “OFF”
when cleaning is complete.
HANDLE pOSITIONS
Press the handle release pedal, located on the lower left side of the vacuum, with
your foot to place your vacuum into one of three cleaning positions.
1. Upright
– For storage and above floor cleaning with tools.
2. Normal cleaning
– Press handle release pedal once. Position used for
most household floor cleaning tasks.
3. Low cleaning
– With the vacuum in normal cleaning position, press
handle release pedal again. Use for reaching under
low furniture such as tables, chairs or beds.
HEIGHT ADjUSTMENT
The Powerfoot/Rotating Floor Brush can be adjusted to clean several floor surfaces.
Note : For optimal cleaning performance, adjust to the lowest practical setting. If your
cleaner is difficult to push, adjust to the next higher setting. Always ensure that
the correct height setting is used for your flooring type as damage may occur if
the height setting is not changed to reflect your flooring type.
1. Turn Height Adjustment Knob to desired setting.
Bare floor Setting
– For bare floors.
Medium Settings
– For short and medium pile carpets.
Highest Setting
– For plush pile carpet
TRANSpORTING cLEANER
1. To move your cleaner from room to room,
put the Handle in the upright position, tilt the
cleaner back on its rear wheels and push
forward.
2. The cleaner can also be moved by using the
Carrying Handle located on the top of the
Dust Bin.
Carrying
Handle