Samsung SU3364, User Manual

Page: 7 / 16

Assembling the cleaner
assembling the cleaner _7
01
ASEMBLING
THE
c
LEANER
ATTAcH HANDLE TO VAcUUM
1. Stand the vacuum upright and slide the base of the handle
firmly into the grooves at the top of the vacuum body.
2. Check to be sure the handle is fitted to the vacuum body. If
there is a gap, continue to push firmly until the handle is flush.
3. Insert the screw provided from the screw packet into the
existing hole. Tighten securely with a screwdriver.
ATTAcH DUST BIN TO VAcUUM
Fit the groove located on the lower
front side of the Dust Bin to the hook
located on the vacuum body and
attach the hook located on the
Dust Bin Handle to the vacuum body
as shown.
ATTAcH VAcUUM HOSE AND TOOLS
1. Attach the Twist Snap Hose by lining up the
taps on the base with the corresponding
notches on the back of the vacuum as shown.
2. Turn the Twist Snap Hose clockwise to lock
the hose into place.
3. Grasping the Hose Wand, slide the end of the
it onto the Hose Wand Base. Snap the Hose
into the Hose Clip.
Note : The vacuum will not operate effectively
unless the Hose Wand is firmly
attached.
4. Attach the Lower Cord Wrap by lining up
the tab on the base with the corresponding
notch on the back of the vacuum and turn it
clockwise as shown.
5. Attach the Extension Wand and the Crevice Tool
together into the holder on the right side of the body
as shown.
6. Attach the Combination Tool into the holder on the
left side of the body as shown.
7. Attach the Bracket Brush on the front of the handle
and clip the Mini Turbo Brush into the Bracket Brush as shown.
* Select Models Only