04
Settings
AllShare Settings
The AllShare Settings screen lists your network
connected AllShare devices and their IP
addresses. Through this screen, you can allow
a device to access the product, deny access, or
delete the device from the AllShare list.
1.
In the Home screen, select
Settings
, and
then press the
v
button.
2.
Select
Network
, and then press the
v
button.
3.
Select
AllShare Settings
, and then press the
v
button.
4.
Select
Device List
, and then press the
v
button. In the Device List, select a device,
and then press the
v
button.
The AllShare Settings pop-up appears.
5.
Select
Allow
,
Deny
, or
Delete
from List
, and
then press the
v
button.
The AllShare Settings screen only displays devices
if you have estblished network connections to
AllShare devices. For more information about
AllShare networked devices, see page 39.
|NOTE |
\
The "Share hard drive" option should be set to
On
to
share the contents through AllShare function.
Device Name
Lets you input a name for the product that will
identify it on your networks.
Upgrading Software
The software Update menu allows you to
upgrade the product's software for performance
improvements or additional services.
•
Never turn the product off or back on manually during
the update process.
1.
In the Home screen, select the
Settings
, and
then press the
v
button.
2.
Select
Support
, and then press the
v
button.
3.
Select
Software Update
, and then press the
v
button.
4.
Select one of the following methods:
• Online
• By Channel
• By USB
• By Downloaded
• Standby Mode Upgrade
5.
Press the
v
button.
|NOTE |
\
The upgrade is complete when the product turns off, and
then turns on again by itself.
\
Samsung Electronics shall takes no legal responsibility
for product malfunction caused by an unstable Internet
connection or consumer negligence during a software
Update.
\
If you want to cancel the upgrade while the upgrade
software is downloading, press the
v
button.
Online
Your product must be connected to the Internet to
use the Online function.
1.
Select
Online
, and then press the
v
button.
The Connecting to Server message appears.
2.
If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
3.
When the download is complete, the
Upgrade Query window appears with three
choices: Upgrade Now, Upgrade Later, or
Don't Upgrade.
4.
If you select Upgrade Now, the product
upgrades the software, turns off, and then
turns on automatically.
5.
If you do not make a selection in one minute
or select Upgrade Later, the product stores
the new upgrade software. You can upgrade
the software later using the By Downloaded
function.
6.
If you select Don't Upgrade, the product
cancels the upgrade.
English
35
|
02230Q-STB-E7900M-XU-ENG.indd 35
2012-05-02 오후 1:52:26
