DEFAULT SETTING
To reset the system, move to "
System Management
>
Settings
>
Load Factory Default
" and press the
<
Initialization
> button.
This returns the factory default settings.
M
`
When you initialize the system without changing the <
Authority Setting
>, you must enter the ID and password to log into the
system after it reboots. The ID and password are "
admin
" and "
4321
", respectively.
Please change the password after you log in.
`
The initial administrator ID is "
admin
" and the password should be set when logging in for the first time.
`
Please change your password every three months to safely protect personal information and to prevent the damage of the information theft.
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a password.
Category
Details
Factory Default
System
Date/Time/Language
Date/Time/Language
Date
YYYY-MM-DD
Time
24 hours
Time Zone
GMT
Time Sync.
OFF
DST
OFF
Language
English
User
Admin
ID
admin
Permission Setup
Restricted Access
Backup/Record/Record
Stop/Search/PTZ/Remote
Alarm Out/Shutdown
Restriction on Network Access
None
Auto Log out
3 Min
Manual Input of ID
OFF
System Management
System Information
Device Name
NVR
Device
Camera
Channel Setup
Video
ON
Audio
OFF
Camera Name
CAM 01 ~ CAM 04
Storage Device
HDD Alarm
Check Alarm Output Port
BEEP
Duration
Continuous
Replace Alarm Output Port
BEEP
Duration
Continuous
Remote Device
Remote Control
ON
ID
00
Monitor
Monitor
Event Display
OFF
Display
All
Multi CH SEQ Time
5 sec
Video Output
VGA(1280x1024)
Display Position Setup
30
English
_135
● APPENDIX
