40
EVENT
Set event related options such as Sensor, Motion, Video Loss, System, G-sensor and IP camera.
About Event activation and activate Recording, Alarm and Notification
Each triggered event can be activated following actions.
1. Record: start recording on selected multiple channels.
2. Alarm: start alarming or buzzer on selected multiple channels.
3. Notification: send message to remote pc with ‘Callback’ or ‘E-mail.’
Example1) Sensor setup
Once sensor 1 is triggered, record channel 1 & 2, alarming 1, 2, 4 and send Notification
1. Press Menu and move to ‘Event->Sensor’ page
2. Tick ‘Sensor1’ and set type (NO or NC)
3. Click ‘Record’ tab and click sensor1 ‘Record’ field
and select channel 1, 2.
4. Click ‘Alarm’ tab and click sensor1 ‘Alarm’ field
and select channel 1, 2, 4.
5. Click ‘Notification’ tab and click sensor1
‘Notification’ tab and select ‘Callback’ IPs and ‘E-
mail’ on list.
* To register Callback IP and E-mail address go to ‘Network->Notification’ page.
Motion Event, Video Loss event setup is same as Sensor event setup.
