ENGLISH-
26
Symptom
checklist
the battery usage time of the
Virtual guard is too short.
▶
Check if you're using manganese drycell batteries and replace the
batteries with new ones. (2 type D (LR20) batteries)
PoWeRbot moves around at
the same place.
▶
Check if Dust sensor mode is on.
-
When POWERbot passes on a dusty area with Dust sensor mode on, it
moves around that area to focus on cleaning. (Dust sensor mode can be
turned on or off by the remote control. However, it will operate again if
you turn off the emergency switch and then turn it back on.)
▶
POWERbot moves around an area and the "DUST" is on the display
panel even though there's no dust at the surrounding area.
-
Check if foreign matters are caught between the dustbin and power
brush and then remove them.
open Source announcement
The software included in this product contains open source software. You may obtain the complete
corresponding source code for a period of three years after the last shipment of this product by sending an email
to mailto:[email protected].
It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM;
a minimal charge will be required.
The following URL http://opensource.samsung.com/opensource/VR9000H/seq/0 leads to the download page
of the source code made available and open source license information as related to this product. This offer is
valid to anyone in receipt of this information.
troubleshooting
SR20H9050U-EN_DJ68-00716C-03_SA.indd 26
2015-02-05 오전 11:34:57
