Samsung SPU-3750T, User Manual

Page: 38 / 49

SPEED DOME CAMERA User Guide
74
SPEED DOME CAMERA User Guide
75
Functional Description Functional Description
P/T Setting
① Pan/Tilt Limit
② Area Setting
③ Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
⑦ Auto Track1
⑧ Auto Track2
Auto Track 1
Auto Track OFF
Camera Height 02.5M
Object Size SMALL
Sensitivity HIGH
Zoom Control OFF
Auto Release OFF
Auto Return OFF
Lost Mode STOP
Main Menu
①
Camera Setting
② Sequence Setting
③ P/T Setting
④
OSD Setting
⑤ Alarm Setting
⑥ Initialize
Status
➡
➡
22. Auto Track 1 (SPU-3750T Only)
▶ Main Menu/P/T Setting/Auto Track1
This commands the camera to automatically follow a moving
object or a person on the screen.
Auto Track :
On/Off : Turns Auto Track on or off.
Camera Height :
Adjusts the height of the camera. Tracking performance
may decrease if the camera height is not adjusted properly.
(Height: 2.5m ~ 30m)
Object Size :
Sets a maximum zoom ratio to zoom in on an object if the
Zoom function is used for the tracking operation.
- Small : Zooms in on a tracking object up to 1/4 of the
screen height.
- Medium : Zooms in on a tracking object up to 2/4 of the
screen height.
- Large : Zooms in on a tracking object up to 3/4 of the
screen height.
Sensitivity :
The object detection sensitivity is adjustable. Lower the
sensitivity if the camera catches a swaying tree branch,
raindrops, or snowflakes during the Auto Track operation.
Zoom Control :
The function’s zoom control settings are as follows.
- Off : Disables the Zoom control.
- One Shot : Performs the Zoom control once during the
Motion Detection and Auto Track operations.
Depending on the movement detection, the
camera performs the Zoom control multiple
times.
- Continuous : Performs the Zoom control continuously.
Auto Release :
Enables setting a maximum duration to follow an object. When the duration expires, the camera
stops following the object and returns to the start position to follow another objects.
Auto Return :
- Off : Commands the camera to stay on the location the last object stopped at instead of
returning to the initial position.
- Time Setting : Sets a duration for the camera to standby upon the Auto Release expiration and
then return to the start position.
Lost Mode :
Sets up an action for the camera in case the object it is following goes out of the detection
range.
- Stop : Commands the camera to stop and abort tracking at the spot where its object
disappeared.
- Research : Commands the camera to stop and standby at the spot where its object
disappeared.
- Zoom-Out : Commands the camera to zoom out and look for a new object in case its current
object disappears.