SPEED DOME CAMERA
User Guide
36
SPEED DOME CAMERA
User Guide
37
Installing Your Camera
Installing Your Camera
Parapet Mount (STB-355PPM)
Setup Box (STB-270B)
•Makesuretofirsthookthecamera'ssafetycabletothemountbeforeproceeding.
Otherwise you may be exposed to serious injury caused by a fallen camera.
Notes
Knob
Control Line
Video Out Line
Power Line
On-wall Mount Type Installation Example
1. Open Hinged Door
As shown in the picture below, gently
press and lift up the handle of the
hinged door on the bottom of the
install base.
2. Connect Terminal Wires
Connect each wire to the pertinent
terminal block.
For more detailed instructions, please
refer to the “Camera Wiring Diagram”
on Page 20.
Once all the wires are connected, close
the hinged door.
• How to Set Up Install Base
•Donotconnectthecameratoapoweroutletuntiltheinstallationiscomplete.Supplying
power in the middle of the installation may cause fire or damage the product.
Notes
