manualshive.com logo in svg

Samsung SPHI500SS, Manual, Page: 160 / 218

Share
Download
Samsung SPHI500SS Manual Download Page 160

Section 2: Understanding Your Phone

2Q: Advanced HotSync 157

category in the Palm

TM

 Desktop application and your phone. You can set 

the File Link feature to check for changes to the external file when you 
perform a HotSync operation. With File Link, you can import data stored 
in any of the following file formats:

䊳

Comma delimited (.csv).

䊳

Tab delimited (.tsv).

䊳

Memo Pad archive (.mpa).

䊳

Address Book archive (.aba).

䊳

Text (.txt).

For information on how to set up a file link, see the Palm Desktop online 
Help.

IR HotSync

®

 Operations

Your phone is equipped with an infrared (IR) port that supports the 
IrCOMM implementation of the standards for infrared communication 
established by the Infrared Data Association (IrDA). This means that not 
only can you beam data to another Palm OS® handheld that is 
equipped with an IR port, but you can also beam data to a cell phone and 
any other device that supports the IrCOMM implementation of the IrDA 
standards. Most importantly, you can use the IR port to perform HotSync 
operations. This is especially useful if you travel with an infrared-enabled 
laptop. You simply enable infrared communication on your laptop and 
handheld and follow the steps in “Performing an IR HotSync operation” 
later in this section.

Preparing your computer for infrared communication

Before you can perform a HotSync operation using the IR port, the 
desktop computer must have the following requirements:

䊳

The computer must support the IrCOMM implementation of the IrDA 
standards.

䊳

The computer must have an enabled infrared port that is built into 
the computer, or an enabled infrared device attached to the 
computer.

Desktop computers are likely to require an infrared device attached to a 
physical COM port. Laptop computers are likely to have a built-in IR port, 
so no external device is necessary. Your computer must also have an 

Summary of Contents for SPHI500SS



























































































































































































































Reviews:

No comments