Section 2: Understanding Your Phone
2Q: Advanced HotSync 155
3.
Select the desired
User
name from the list.
4.
Select the application from the
Conduit
list.
5.
Click
Change
.
6.
Select the desired changed information from the choices listed in the
dialog box.
7.
Choose the duration of the setting.
䊳
To have the setting affect only the next HotSync operation, deselect
Set as Default
.
䊳
To have the setting remain permanently, click the
Set as Default
setting.
8.
Click
Done
to activate the settings.
Performing a HotSync
®
Operation via a Network
When you use the Network HotSync software, you can take advantage of
the LAN and WAN connectivity available in many office environments.
The Network HotSync software allows you to perform a HotSync
operation by dialing in to a network or by using a cradle that is
connected to any computer on your LAN or WAN (provided that the
computer connected to the cradle also has the Network HotSync software
installed, your computer is on, and the HotSync Manager is running).
The Network HotSync software requires the following:
䊳
Your computer has TCP/IP support installed.
Summary of Contents for SPHI500SS
