Samsung SNZ-5200 User Manual Download Page 9

Page: 9 / 108

English

●

over

view

proDuct featureS

•

HD video Quality

•

multi-Streaming

This network camera can display videos in different resolutions and qualities

simultaneously using different CODECs.

However, MPEG-4 video can not be played on a web page. Use CMS software if you want to play

the video on a web page.

•

web Browser-based monitoring

Using the Internet web browser to display the image in a local network environment.

•

alarm

If an event occurs, the event-related video will be transferred to the FTP/email specified

by the user or saved to the Micro SD memory, or the event signal will be sent to the Alarm

Out port.

•

motion Detection

Detects motion from the camera’s video input.

•

intelligent video analysis

Analyzes video to detect logical events of specified conditions from the camera’s video

input.

•

auto Detection of Disconnected network

Detects network disconnection before triggering an event.

•

onvif compliance

This product supports ONVIF.

For more information, refer to www.onvif.org.

recomenDeD pc SpecificationS

•

CPU : Intel Core 2 Duo 2.6GHz or higher

•

Operating System : Microsoft Windows 7/VISTA/XP SP3, Apple MAC OS

•

Resolution : 1280X1024 pixels or higher

•

RAM : 2GB or higher

•

Web Browser : Firefox, Google Chrome, *Apple Safari, Windows Internet Explorer 9.0(32bit)

/8.0(32bit)/7.0(32bit)

Neither a beta test version unlike the version released in th.e company website nor the developer version will

be supported.

It is recommended to connect to IPv6 in Windows 7.

For Mac OSX, only the Safari browser is supported.

Summary of Contents for SNZ-5200













































































































Search results

Summary of Contents for SNZ-5200

Reviews:

Related manuals for SNZ-5200

Brands by name

Popular brands

Samsung SNZ-5200, User Manual

Search results

Summary of Contents for SNZ-5200

Reviews:

Related manuals for SNZ-5200

Brands by name

Popular brands