setup screen
72_
setup screen
va / mD
This can be set to generate an event signal when a motion or intelligent video analysis event
is detected.
1.
From the Setup menu, select the
<
event ( )
> tab.
2.
Click <
va / mD
>.
J
`
DIS cannot be used if VA/MD is used.
`
to use motion detection (mD)
1.
Select a motion detection mode.
2.
Set <
motion Detection function
> to
<
enable
>.
3.
Select a sensitivity level of the motion
detection.
Higher the sensitivity is, the smaller
motion is detected.
4.
Use the drag-and-drop method to
specify the detection area on the video.
5.
Specify the activation time and
activation condition.
`
For more information about <
Activation time
> and <
Action
>, refer to “
Alarm input
”. (page 71)
6.
When done, click [
apply (
)
].
J
`
If you are controlling the Pan/Tilt/Zoom operation or fitting the focus of the camera, the motion
sensor may not work.
