setup screen
52_
setup screen
Exposure Setup
You can adjust the exposure level of the camera.
1.
Select <
Exposure
>.
2.
Select each item and set it properly.
•
Brightness : Adjust the screen
brightness.
•
Shutter mode : Adjust the electronic
shutter of the camera.
- ESC (Electronic shutter control) :
Adjust the shutter speed
automatically according to the
ambient brightness.
- Manual : Adjust the shutter speed of the camera manually.
- A.FLK (Anti flicker) : This will prevent the screen from flickering.
•
Shutter speed : Control the shutter speed manually.
•
SSNR3 : Specify the use of noise reduction.
•
SSNR3 level : Adjust the noise reduction level.
•
Sens-up mode : Automatically senses the darkness level at night or in a low
contrast scene and extends the accumulation time accordingly for a bright and
sharp image.
If you set the shutter mode to Manual/A.FLK, SENS-UP mode will be deactivated.
The greater the video accumulation factor is, the brighter the screen is but the afterimage of a
moving object grows accordingly.
•
Sens-up limit : Set the work condition to Auto mode in a low contrast scene.
•
Iris : You can set the camera iris to AUTO or MANUAL to your preference.
For a camera with the shutter type of ESC, the iris will operate properly only if it is set to
<
Manual
>.
If the iris is set to <
Auto
>, the shutter speed will be fixed to 1/30 second in ESC mode.
•
AGC mode : Specify the level according to the screen luminance.
