Samsung SNV-5080R User Manual Download Page 14

Page: 14 / 109

14_

installation & connection

INSTALLATION

Precautions before installation

Ensure you read out the following instructions before installing the camera:

•

Select an installation site (ceiling or wall) that can endure at least 5 times of the
camera weight.

•

Stuck-in or peeled-off cables can cause damage to the product or a fire.

•

For safety purposes, keep anyone else away from the installation site. And put aside
personal belongings from the site, just in case.

Disassembling

With the provided L-shaped
wrench, loosen 3 bolts on the top
cover counter clockwise to remove
the cover.

Loosen 3 screws on the camera body
counter clockwise, and pull up the
left/right LOCKER lever (in the arrow
direction) to release the lock. Then,
remove the camera from the case.

LOCKER Lever

Bolts

Camera Case

Top cover

Camera Body

Summary of Contents for SNV-5080R














































































































Search results

Summary of Contents for SNV-5080R

Reviews:

Brands by name

Popular brands

Samsung SNV-5080R, User Manual

Search results

Summary of Contents for SNV-5080R

Reviews:

Brands by name

Popular brands