background image

English 

_99

  

Setup 

Screen

 

Color level : Adjust the strength of video color.

 

Defog : You can improve images in foggy or cloudy weather. 

It is set to <

off

> as a default. Specials are used when the video looks blurry in the 

foggy weather.

 - Off : Fog removal function is not active.

 - Auto : Images are compensated automatically according to the amount of fog. 

To improve the effects of this function, adjust the <

Defog level

>.

 - Manual : You can set the amount of compensation manually for the image.

 

M

 

`

Use this function if the image is unclear due to foggy weather.

 

J

 

`

If <

Auto

> is selected for the defog mode, the level is reduced as the fog is reduced.  

If you wish to maintain the fog removal level even when the amount of fog is reduced, select 

<

Manual

>.

 

`

Note that the image can be dark if the fog level is high with the amount of fog being small. 

 

Defog level : Adjust the fog removal level.

Summary of Contents for SNP-L5233H



















































































































































































Reviews: