face detection
You can set to detect recognized face and trigger an event accordingly.
1.
From the Setup menu, select the
<
event ( )
> tab.
2.
Click <
face detection
>.
3.
Set whether or not to <
enable
>.
4.
Select <
Sensitivity
> tab to set the
sensitivity level.
`
As the sensitivity grows, face detection
becomes more close and detailed.
5.
Select the <
area
> tab and select 4
vertices in the image with your mouse
to specify the detection area.
`
Select up to 4 areas for detection or non-
detection.
`
While drawing the area, you can cancel an
area by right-clicking.
6.
To delete an area, right-click on the
area, and select delete [
oK
] on the
pop-up menus.
7.
Specify the activation time and
activation condition.
`
For more information about <
Activation
time
> and <
Action
>, refer to “
Alarm input
”. (page 122)
8.
When done, click [
apply (
)
].
setup screen
132_
setup screen
