Samsung SNB-7004 User Manual Download Page 26

Page: 26 / 186

installation & connection

26_

installation & connection

inStaLLation (SnD-7084)

precautions before installation

Ensure you read out the following instructions before installing the camera:

•

It must be installed on the area (ceiling or wall) that can withstand 5 times the weight

of the camera including the installation bracket.

•

Stuck-in or peeled-off cables can cause damage to the product or a fire.

•

For safety purposes, keep anyone else away from the installation site.

And put aside personal belongings from the site, just in case.

Disassembling

Use one hand to hold the camera’s bottom part

and turn the cover counterclockwise with another

hand to separate it.

Lift up the inner cover to separate it.

Summary of Contents for SNB-7004



























































































































































































Search results

Summary of Contents for SNB-7004

Reviews:

Related manuals for SNB-7004

Brands by name

Popular brands

Samsung SNB-7004, User Manual

Search results

Summary of Contents for SNB-7004

Reviews:

Related manuals for SNB-7004

Brands by name

Popular brands