setup screen
7.
Specify an operation that will perform if an alarm occurs.
•
FTP : Specify the use of FTP transfer in the alarm input setup.
•
E-mail : Specify the use of email transfer in the alarm input setup.
•
Record : Specify the use of recording in the alarm input setup.
•
Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
•
Goto preset : Moves to the specified preset location when setting the alarm input.
`
Only for SNB-7004.
`
Only if the camera pan/tilt receiver is installed, Goto preset is available.
8.
When done, click [
apply (
)
].
time schedule
You can set to save the video data at a certain interval as scheduled regardless of the
actual occurrence of the event.
1.
From the Setup menu, select the
<
event ( )
> tab.
2.
Click <
event setup
>.
3.
Select <
time schedule
> from <
event
action setup
>.
4.
Set whether or not to <
enable
>.
5.
Specify the <
transfer interval
>.
6.
Specify the activation time and
activation condition.
`
For more information about <
Activation
time
> and <
Action
>, refer to “
Alarm input
”.
(page 127)
J
`
The transfer interval setting value must be
smaller than the preset activation interval to succeed in image transmission.
7.
When done, click [
apply (
)
].
128_
setup screen
Summary of Contents for SNB-7004
Page 1: ...NETWORK CAMERA User Manual SNB 7004 SND 7084 SNV 7084 ...
Page 19: ...English _19 overview Components c b g d e f a AU DI O IN AU DI O OU T ij k h ...
Page 157: ...SND 7084 Unit mm inch 118 4 65 Ø 132 1 5 2 Ø 97 3 82 107 6 4 24 English _157 appendix ...
Page 158: ...appendix SNV 7084 Unit mm inch 69 5 2 74 118 5 4 67 Ø 160 6 3 Ø 100 3 94 158_ appendix ...
