Samsung SMT-W5120 User Manual Download Page 87

Page: 87 / 132

SMT-W5120 User Guide _

Back Light

This function enables you to set the intensity of the lighting on the phone screen.

Light Time

This function enables you to set the time for background lighting, which lights automatically when the keys
are pressed or a messages appears.

[MENU]



7. Phone Settings



[OK]



Enter a Password



5. Back Light



[OK]



1. Light Time



[OK]



(Select light time)



[OK]

Delete submenu

[3. Always off]

- The lighting of the LCD screen turns off automatically unless a button is

pressed within 8 seconds. You can also set the lighting duration to 20

seconds or turn off the lighting altogether.

- Select

‘Always Off’ to disable the light at all times.

Summary of Contents for SMT-W5120





































































































































Search results

Summary of Contents for SMT-W5120

Reviews:

Related manuals for SMT-W5120

Brands by name

Popular brands

Samsung SMT-W5120, User Manual

Search results

Summary of Contents for SMT-W5120

Reviews:

Related manuals for SMT-W5120

Brands by name

Popular brands