Samsung SMT-i5243 User Manual Download Page 11

Page: 11 / 96

SMT-i5243 User Guide _

Phone Installation

Connection to Back Ports

If a headset is used, connect it to the headset port.

Connect a handset to the handset port.

Connect one end of the PC connection LAN cable, which was provided
with the phone, to the

PC connection port

of the phone. Connect the

other end to the PC network port.

Connect the LAN cable connected to the network to the

LAN

connection port

of the phone.

- If power is supplied from the LAN port (PoE), the phone is booted up when the LAN

is connected.

If PoE is not supported, connect the power adapter to the

power

connection port

. When the plug of the connected power adapter is

plugged into the outlet, the phone is booted up. (The power adapter is
purchased separately.)

Summary of Contents for SMT-i5243

































































































Search results

Summary of Contents for SMT-i5243

Reviews:

Related manuals for SMT-i5243

Brands by name

Popular brands

Samsung SMT-i5243, User Manual

Search results

Summary of Contents for SMT-i5243

Reviews:

Related manuals for SMT-i5243

Brands by name

Popular brands