Samsung SMT-i5243 User Manual Download Page 42

Page: 42 / 96

SAMSUNG Electronics Co., Ltd.

MAIN MENUS

This section describes menu functions. The phone includes Call, UC, Phone and
Settings menus.

Menu Structure

Clicking the

[Menu]

button when a phone is in standby mode displays menus on a

screen. The desired menu can be selected by using the navigation button or the
selection button on the right side or at the bottom of a screen.

Button

Sub-menus

Function

1. Phonebook

Provides the function to save, search and register
with the phonebook.

2. Call Log

Shows all information on inbound/outbound calls
and missed calls.

3. Message

Enables the creation/saving and sending/receiving
of a message.

4. Conference

Supports a conference call.

Call

5. Directory service

This allows a user to search through the users
registered with the LDAP (Lightweight Directory
Access Protocol) server. (For specific server
information, contact the administrator.)

Summary of Contents for SMT-i5243

































































































Search results

Summary of Contents for SMT-i5243

Reviews:

Related manuals for SMT-i5243

Brands by name

Popular brands

Samsung SMT-i5243, User Manual

Search results

Summary of Contents for SMT-i5243

Reviews:

Related manuals for SMT-i5243

Brands by name

Popular brands