5-42
Chapter 5
CLI (Command Line Interface)
[14] Display Port Status
Function
You can view the status of each port installed in the system slots.
Procedure
1. In the <PSTN Configuration Menu> screen, type ‘14’, and press [Enter].
2. When the following message appears, input the slot number to display, and
press [Enter].
Slot Number [0: VoIP, 1: US1, 2: US2, 3: D-TRK] :
3. Port status of the selected slot will appear as follows:
<<<<< Display Port Status >>>>>
[VoIP]
+-------+---------+----------+---------+---------+--------+
| Port No
| Card Type
| Fault Block
| MMC Block
| Call State
| Opp. Port
|
+-------+---------+----------+---------+---------+--------+
|
0
| VoIP_04
| Normal
| UnBlock
| C0
| FF
|
|
1
| VoIP_04
| Normal
| UnBlock
| C0
| FF
|
|
2
| VoIP_04
| Normal
| UnBlock
| C0
| FF
|
|
3
| VoIP_04
| Normal
| UnBlock
| C0
| FF
|
|
4
| VoIP_04
| Normal
| UnBlock
| C0
| FF
|
|
5
| VoIP_04
| Normal
| UnBlock
| C0
| FF
|
|
6
| VoIP_04
| Normal
| UnBlock
| C0
| FF
|
|
7
| VoIP_04
| Normal
| UnBlock
| C0
| FF
|
+-------+---------+----------+---------+---------+--------+
[ . :Exit ]
Slot Number [0: VoIP, 1: US1, 2: US2, 3: D-TRK] :
y
Port No : The port number on the slot.
y
Card Type : The card type installed in the slot.
y
Fault Block : Indicates an error on the selected port. When the port is
operated normal, it shows ‘Normal’.