5-28
Chapter 5
CLI (Command Line Interface)
[6] Call Control Method
Function
You can set the signal type required to process a call.
The items in this menu have different default values for Tandem
Gateway and Standalone modes.
Procedure
1. In the <PSTN Configuration Menu> screen, type ‘6’, and press [Enter].
<<<<< Call Control Method >>>>>
+---+------------------+------+---------+---------+
| No | Digit Timer
| Value
| Unit
| Default
|
|
|
|
|
| TNDM(STND) |
+---+------------------+------+---------+---------+
| 0
| First Digit Time
| 5
| 1 sec
| 5(10)
|
| 1
| Inter Digit Time
| 2
| 1 sec
| 2(10)
|
+---+------------------+------+---------+---------+
+---+------------------+------+---------+---------+
| No | Trunk LOOP Timer
| Value
| Unit
| Default
|
+---+------------------+------+---------+---------+
| 2
| Loop OK Time
| 60
| 100 msec
| 60(60)
|
| 3
| OK Release Time
| 80
| 100 msec
| 80(80)
|
+---+------------------+------+---------+---------+
[ . :Exit ]
2. Input the number of the call control method to be changed,, and press [Enter].
Configuration Item Number:
