Disassembly and Assembly
70
11
Place the suction cup in the center of the right edge of the screen, and lift upwards
while separating it with the opening pick.
•
As the screen can be damaged by excessive force, be careful not to damage the
screen.
•
As the internal circuitry can be damaged, do not insert the opening pick more
than 1-2 mm.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the screen to further soften the adhesive. When
reheating, it should be heated no longer than 30 seconds.
12
Slide the opening pick back and forth along the right edge to slice through the
adhesive.
Leave the opening pick inserted in the right edge side to prevent the adhesive from
resealing.
•
As the screen can be damaged by excessive force, be careful not to damage the
screen.
•
As the internal circuitry can be damaged, do not insert the opening pick more
than 1-2 mm.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the screen to further soften the adhesive. When
reheating, it should be heated no longer than 30 seconds.
Summary of Contents for SM-X818U
