Samsung SM-X818U Repair Manual Download

Page: 23 / 182

Quality Test

USB connection

•

Purpose: Check whether the multipurpose jack

recognizes the USB cable normally.

•

How to check:
Connect any USB cable to your device.

•

Provided information

‒

Status: View whether the feature is working

normally.

‒

FAQ: View frequently asked questions.

To test this feature, the USB cable must be

connected to a computer.

Cable charging

•

Purpose: Check whether the multipurpose jack

recognizes the charger normally.

•

How to check:
Connect a charger to your device.

•

Provided information

‒

Status: View whether the feature is working

normally.

‒

Charging speed: View the charging speed

according to the charger you connected.

Use only Samsung-approved chargers.

Summary of Contents for SM-X818U























































































































































































Search results

Summary of Contents for SM-X818U

Reviews:

Related manuals for SM-X818U

Brands by name

Popular brands

Samsung SM-X818U, Repair Manual

Search results

Summary of Contents for SM-X818U

Reviews:

Related manuals for SM-X818U

Brands by name

Popular brands