Appendix
94
A small gap appears around the outside of the Gear case
•
This gap is a necessary manufacturing feature and some minor rocking or vibration of
parts may occur.
•
Over time, friction between parts may cause this gap to expand slightly.
Removing the battery
•
To remove the battery, you
must
visit an authorised service centre with the provided
instructions.
•
For your safety, you
must not attempt to remove
the battery. If the battery is not
properly removed, it may lead to damage to the battery and device, cause personal
injury, and/or result in the device being unsafe.
•
Samsung does not accept liability for any damage or loss (whether in contract or tort,
including negligence) which may arise from failure to precisely follow these warnings and
instructions, other than death or personal injury caused by Samsung’s negligence.
1
Remove the strap from the Gear.
2
Remove the screws from the back of the Gear.
3
Remove the screen from the Gear’s body using a flat edged tool.
4
Remove the circuit board by lifting it out of the Gear’s body.
5
Remove the battery by pulling the battery connector at the right side of the Gear
upwards.
