56
_ Smart Viewer
Auto Connection
You can set if Smart Viewer is automatically
connected to the selected DVR or site when
starting the program. If you check
Auto
Connection Enable
, available DVRs and
sites are displayed in the pull-down list. After
selecting one from the list, Smart Viewer
connects to the selected DVR or site whenever
it is started.
Language
You can set the language to be displayed on
Smart Viewer.
Site Setup
Click
Site Setup
for configuring the site-related
settings. Smart Viewer connects to the DVR or
site that has been registered here. A site can
have multiple DVRs.
1
3
5
2
4
1. The registered DVRs are displayed.
2. You can use the buttons for adding/deleting/
editing DVRs.
3. Use the button to move the selected DVR to
the selected site. But, if the selected DVR is
set to ADSL Network, it cannot be moved to
the site.
4. The registered sites are displayed.
5. You can use the buttons for adding/deleting/
editing sites.
DVR List
The DVRs that you want to connect using
Smart Viewer are listed in
DVR List
. You can
register a new DVR, or delete/edit the selected
DVR. The name and IP/MAC address of the
registered DVR are displayed. If the DVR uses
a static IP, select
Static IP
in
Address Type
,
enter the name of DVR in
Name
, and the IP
address in
IP Address
.
Set the port number in
Port No
. so that it
matches the port number that you’ve set in the
network menu of DVR. For connecting to the
DVR, you need to set both Admin password
and user password.
If your DVR uses a dynamic IP such as in a
cable modem, VDSL, and PPPoE for ADSL,
set the address in
MAC Address.
Set the port number in
Port No
. so that it
matches the port number that you’ve set in the
network menu of DVR.
If you have selected
Use DDNS
in the
SHR-5162_Eng.indb 56
2007-8-2 14:48:25
