34
_ menu setup
IP
Set the IP address for the main body of the
product for connecting to the network. If the
connection mode is set to Static IP, type
the IP address. If the connection mode is
Dynamic IP or ADSL(PPPoE), the IP address
allocated by the DHCP server or ADSL
company automatically appears. In case of
DHCP or ADSL connection failure, the value
“000.000.000.000” is displayed. Then, press
OK
to retry connection for getting the IP
address. If the connection failure continues,
turn off the power for a while and reboot the
system for retry.
Gateway
In case of Static IP, set the gateway address
assigned. With Dynamic IP or ADSL, the
address is automatically allocated.
Subnet Mask
Set the subnet mask address assigned.
DNS
Set the DNS address. The default value is
“168.126.63.1.” If you have hard time to
connect to the network when you are using
DHCP or ADSL, contact the network manager
or ADSL company personnel to set up a new
DNS address.
ADSL User ID
If the product is connected to the ADSL
network, input the user ID subscribed to the
ADSL company. You can input the user ID
using the virtual keyboard up to 40 letters
irrespective of alphabets, numbers, and
symbols.
Password
If the product is connected to the ADSL network,
input the user password subscribed to the ADSL
company. You can input the password using the
virtual keyboard up to 40 letters irrespective of
alphabets, numbers, and symbols.
CAUTION
In case of ADSL, the audio is not
played on Smart Viewer. Be sure
to set the IP, port, Subnet mask,
gateway, and DNS to make Smart
Viewer connected to the product.
Wrong settings may result in not being
connected to the product. Please
contact the network manager or
ADSL company personnel to get the
correct setting values.
Transfer Protocol Settings
You have to configure the data transfer protocol
related settings to use network for transferring
data.
Protocol type.
Select any of TCP and UDP. If you have
selected ADSL in IP Setup, only TCP is
available. In this case, audio transmission is not
available.
Port(TCP)
Select a number ranging from 554 to 2046
using the
UP/DOWN
direction buttons and
the port number will change by 4. Once the
first port number is determined, the following 3
numbers will change.
Port(UDP)
Select a number ranging from 8000 to 9760
using the
UP/DOWN
direction buttons and the
port number will change by 160. Once the first
number is determined, the following number
will change.
Unicast/Multicast
Select any of Unicast and Multicast. Unicast
is set by default. When you select
Multicast
,
the multicast IP is activated and you can
input the address ranging from 224.0.0.0
to 239.255.255.255 using the
UP/DOWN
direction buttons.
TTL
Enter a number ranging from 0 to 255. You can
input it only when Multicast is selected. The
default value is “5.”
DDNS Site
Select a DDNS site. This DDNS setup is
necessary to see the monitoring screens from
the remote computer that is running Smart
Viewer. Available values are Off, Samsung
DDNS, dyndns.com, no-ip.com, and changeip.
com. If you select
Off
, the IP will not be
registered in DDNS.
- If you select
Samsung DDNS
, register
the TCP IP in DDNS that is operated by
Samsung. To configure the DDNS-related
settings in Smart Viewer, select
Setup >
Site Setup > DVR Registration
and set the
address type with MAC Address, and then
register the MAC address that is displayed
in the System Information and Setup menu.
(or you can get the Ethernet address on the
side label attached on the product.)
- Using the free public DDNS web sites such
as dyndns.com, no-ip.com, and changeip.
com, you can acquire an URL by registering
a dynamic IP. After this action completes,
enter the host name, user name, and
password in this window.
Cancel
OK
Transfer Protocol Settings
Protocol Type
UDP
Port(TCP)
554.555.556.557
Port(UDP)
8000-8159
Unicast/Multicast
Unicast
Multicast IP
224.126.063.001
TTL
005
DDNS Site
Off
Host Name
User Name
User Password
SHR-5162_Eng-C2~C9.indd 34
2007-09-19 ¿ÀÀü 9:33:04
