13
14
15
18
17
16
[Set the welcome function and deactivate the security mode]
[Deactivate the Welcome function]
[Set the detection distance]
●
Welcome function deactivation Even though a user approaches a door lock, the door
lock does not get automatically in the authentication standby status. Touch the number
pad or contact your fingerprint the fingerprint authentication part to use the door lock.
A user can set the distance that can detect a user who approaches the door.
(Short distance: About 40 cm, middle distance: About 60 cm, long distance: About 80 cm)
3. Select Welcome Function Setting and Security Mode Cancellation
3. Select Welcome Function Cancellation
3. Select Detection Distance Setting
4. Set Detection Distance
- Select the short distance setting
- Select the middle distance setting
- Select the long distance setting
Press the [2] button.
- To hear the announcement again, press a number
button before pressing the [
] button.
Press the [3] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
Press the [4] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
Press the [1] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
Press the [2] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
Press the [3] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
“It activates
the welcome
function.”
“It deactivates
the welcome
function.”
“Identification
range setting
mode”
“It is set to a close
range.”
“It is set to a
middle range.”
“It is set to a long
range.”
Press the [
] button.
Press the [
] button.
Press the [
]
button.
Press the [
] button.
Press the [
] button.
Press the [
] button.
“Ding dong deng”
→
“It is set.”
“Ding dong deng”
→
“It is deactivated.”
“Press “1” and the
asterisk sign for a close
range. Press “2” and
the asterisk sign for a
middle range. Press “3”
and the asterisk sign
for a long range.”
“Ding dong deng”
→
“It is set.”
“Ding dong deng”
→
“It is set.”
“Ding dong deng”
→
“It is set.”
You can set various functions of the door lock.
In the Setting mode, select a function.
(For the details of each function, refer to page 15-20.)
※
In the Setting mode, be careful that the door is not locked even though it is closed
during the setting time (60 seconds). To cancel the Setting mode, press the Register
button section of the inner body.
When a user approaches a door lock, the door lock gets automatically in the
authentication standby status even though the user does not touch the number
pad or the fingerprint authentication part.
By default, the Welcome function is set, and the Security mode is deactivated. In
addition, the detection distance is set to Middle distance.
Open the battery cover
of the inner body, and
press the [Register] button
shortly.
1. [Register] Button
“Ding dong”
→
“Press the password and the asterisk sign
to manage an authentication tool.
Press the Security button for the environ-
ment setting. Press the Register button to
end this process.”
[Set the welcome function and the security mode]
Press the [
]
button.
1. [Security] Button
“Setting mode.
Press ”1” and the asterisk sign for the Welcome function.
Press ”2” and the asterisk sign for the Randomizer. Press
”3” and the asterisk sign for the Dual authentication. Press
”4” and the asterisk sign for the Door close time. Press ”5”
and the asterisk sign for the Voice guidance.
Press “9” and the asterisk sign for Wi-Fi.”
●
Welcome function setting: When a user approaches to the door lock, the authorization
standby mode will automatically activate.
●
Security mode setting: When someone is in front of the door lock for a minute or longer,
an alarm sound is generated.
2. Select Welcome Function Setting Mode
3. Set the welcome function and the security mode
Press the [1] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
Press the [1] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
“Welcome
Function Setting
mode”
“Welcome
function and
Security mode
setting”
Press the
[
] button.
Press the [
] button.
“Press “1” and the
asterisk sign to activate
the welcome function and
the security mode. Press
“2” and the asterisk sign
to activate the welcome
function. Press “3” and
the asterisk sign to
deactivate the welcome
function. Press “4” and
the asterisk sign to set the
identification range.”
“Ding dong deng”
→
“It is set.”
Setting Mode
Welcome Function
1. Enter Setting Mode
Select the Setting mode. (Refer to the Setting mode.)
This function sets the delay time of the door lock locking after open/close door
sensor detects the door.
In an environment that the door closes slowly and the deadbolt jams before the
door is fully closed, the situation can be fixed by adjusting the door lock closing
time.
By default, the door lock closing time is set to 1 second.
2. Select Door Lock Time Setting Mode
3. Set Time
Press the [4] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
Press [1] ~ [9] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
“Door closing
time-setting
mode ”
“It is set to 1 second.”
~ “It is set to
9 second.”
Press the [
] button.
Press the [
] button.
“Press “1” for one
second and “2” for
two seconds. Press a
number from one to
nine and the asterisk
sign.”
“Ding dong deng”
→
“It is set.”
3. Select Activation/Deactivation
- Select the setting
- Select the deactivation (common mode)
Press the [1] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
Press the [3] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
“Setting mode”
“Deactivation
mode”
Press the [
] button.
Press the [
] button.
“Ding dong deng”
→
“It is set.”
“Ding dong deng”
→
“It is deactivated.”
Door Lock Closing Time Setup Function
1. Enter Setting Mode
Select the Setting mode.
(Refer to the Setting mode on page 15.)
By pressing a password in order after two arbitrary numbers are inputted,
a user can prevent password leak.
By default, the multi-leveled security code entry mode is set.
Double authorization mode requires both password and fingerprint to open the door,
enhancing more security.
To set the double authorization mode, one or more fingerprints need to be registered.
When purchased, the door lock is not set to double authorization mode initially.
2. Select Multi-Leveled Security Code Entry Mode Setting.
2. Select Double Authorization Mode.
Press the [2] button.
- To hear the announcement again, press a number
button before pressing the [
] button.
Press the [3] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
“Randomizer
setting mode”
“Dual authentication
setting mode”
Press the [
] button.
Press the [
] button.
“Press “1” and the
asterisk sign for acti-
vation. Press “3” and
the asterisk sign for
deactivation.”
“Press “1” and the
asterisk sign for acti-
vation. Press “3” and
the asterisk sign for
deactivation.”
3. Select Activation/Deactivation
- Select the setting
- Select the deactivation (common mode)
Press the [1] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
Press the [3] button.
- To hear the announcement again, press a
number button before pressing the [
] button.
“Setting mode”
“Deactivation
mode”
Press the [
] button.
Press the [
] button.
“Ding dong deng”
→
“It is set.”
“Ding dong deng”
→
“It is deactivated.”
Multi-Leveled Security Code Entry Mode
1. Enter Setting Mode
Select the Setting mode.
(Refer to the Setting mode on page 15.)
●
The detection distance may change if the door lock is directly exposed to the
sunlight or lighting.
●
It is recommended to limitedly use the security mode setting because an alarm
sound may be triggered in the case of row houses (or apartments) where lighting is
always turned on or apartment houses of corridor access directly exposed to the
sunlight.
Note
Double Authorization Mode
1. Enter Setting Mode
Select the Setting mode.
(Refer to the Setting mode on page 15.)
All registered data are deleted.
●
WiFi linkage: Initialize the mobile key and WiFi registration information.
- The master/user passwords and the fingerprint information are maintained.
The master/user passwords key tags, and fingerprint information can be initialized.
●
WiFi linkage: The mobile key is initialized and the WiFi registration information is
maintained.
●
Link of a wireless module: The linked information is maintained.
While the door is opened,
Open the battery cover of
the inner body and press
the [Register] button for
5 seconds.
1. Press and Hold [Register] Button
“Ding dong”
→
“Ding ding”
→
“Press the password and the asterisk
sign for interworking initialization. Press
“4560852580” and the asterisk sign for the
initialization of the key information.”
[Initialize the linked information]
[Initialize the key information]
When the number pad is
lighted, enter the master
password and press the
[
] button.
When the number
pad is lighted, enter
“4560852580”
and press the [
] button.
2. Enter Master Password
2. Enter Initialization Number of Key Information.
Success: “The reset has been completed.”
Failure: “Wrong information was entered.”
Success: “The reset has been completed.”
Failure: “Wrong information was entered.”
Install the
‘Samsung Smart Doorlock’
app from Google Play/App Store.
(Chinese users can install the Android app from Baidu, Tencent, or Qihoo360.)
After becoming a member, a WiFi can be connected.
- For the information on the registration and the use method, refer to the guide provided from
the app.
App Installation and Use
When connecting a WiFi, a user can use App based various user services
through WiFi.
WiFi connection is activated only when the door is closed.
(WiFi band: 2.4 GHz)
Register a WiFi
(OPTION)
Initialization
●
If you separately purchase a Samsung Wi-Fi module,
see page 13 to mount it into the door lock.
Note
3. Select Wireless Connection Setting
Press the [4] button.
- To hear the announcement again, press a number
button before pressing the [
] button.
“Wireless module
management
mode”
Open the battery cover
and remove the batteries.
Open the module cover and
mount a WiFi or wireless
module into the WiFi or
wireless module socket.
Insert the batteries and
close the battery cover.
Press the [
] button.
“Press “1” and the as-
terisk sign to manage
a wireless module.”
The Connection/Disconnection mode is activated from the controller.
(Refer to the user manual of the controller.)
5. Select Wireless Module Management
4. Enter Connection/Disconnection Mode from Controller
Press the [1] button.
- To hear the announcement again, press a number
button before pressing the [
] button.
“Wireless Module
Management
mode”
Press the [
] button.
“A wireless module is
being set up.“
[Wireless module connection/disconnection]
The wireless module is
connected.
6. Wireless Module Connection
“Ding dong deng”
→
Success: “It was normally processed.”
Failure: “Failed.”
You can purchase a Wi-Fi or wireless module sold by Samsung and mount it into
the Wi-Fi or wireless module socket.
However, even though you purchase a proper Samsung Wi-Fi or wireless
module, it may not be used in a model that does not support the module. Thus,
please, contact the store before purchasing a Wi-Fi or wireless module to inquire
the module type of your model.
1. Mount WiFi or Wireless Module
Wi-Fi or wireless
module
Managing Wireless Module
(OPTION)
●
A wireless module not sold by Samsung cannot be arbitrarily connected
and used.
●
For the wireless module, it may be impossible to purchase depending on the
situation by country.
●
When a wireless module is linked, up to 20 user passwords can be
registered. (Only for Zigbee / Z-wave module).
Warning
2. Enter Registration Mode
Select the Registration mode.
(Refer to the Registration mode on page 7.)
GC68-02340A ED:02
