COLOR CCD CAMERA
User Guide
10
COLOR CCD CAMERA
User Guide
11
5
Bottom View
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)
5
Tripod Mounting Bracket Screw Hole
Used to fix the camera on a bracket or tripod.
The screw sizes for this hole are as follows:
6
Function Setup Button
• SET Button : Displays the menu on the screen. Press this button to confirm status or
after changing a selected item.
• Up and Down Button : Used to move the cursor up or down in the menu screen to
select a desired menu item.
• Left and Right Button : Used to move the cursor left or right in the menu screen or to
change the value of the selected item.
7
D & N Input Port
You can switch to Day & Night Mode by connecting an external signal to this port.
8
MD Output Port
Motion detection signals are output through this port.
9
RS-485 Control Port
You can control SETUP MENU through this port by using external controllers like a Remote
controller that RS-485 Communication is supported. For details, see page 16.
❿
Video OUT Port
Video signals are output through this port. Connect this port to the Video IN port of a
monitor.
⓫
Power LED
When power is properly connected, this LED comes on.
⓬
Power Input Terminal
Connect the power as specified for each model here.
You can separate the Tripod Mounting Bracket and install it on the
top or bottom of the camera. Make sure to use the Tripod
Mounting Bracket when fixing the camera to a bracket or tripod.
Otherwise the camera may not be secure, or the internal circuitry of
the camera may be damaged.
Overview
Overview
❿
⓫
⓬
6
7
8
9
Rear View
Summary of Contents for SHC-737 Series
Page 21: ......
