Phone Settings
122
Change Password
(Menu 5.6.4)
The Change Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to confirm it
by entering it again.
Privacy
(Menu 5.6.5)
Using this menu, you can lock your media contents, such as
multimedia messages, photos, videos, voice memos, images
and sounds. Once you have locked the contents, you must
enter the phone password to access the associated menus.
When the phone asks for the phone password, enter the
password and press the OK soft key.
Note: The password is preset to “00000000” at the factory. To change
this password, see page 122.
To
Press the
select an item to lock
Up or Down key. To lock all of
the contents, select All.
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
lock the marked items
OK soft key.
Phone Settings
123
SIM lock
(Menu 5.6.6)
When the SIM Lock feature is enabled, your phone only works
with the current SIM. You must enter the SIM lock code to use
a different SIM card.
Once you have entered the lock code, you are asked to
confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
FDN Mode
(Menu 5.6.7)
FDN (Fixed Dial Number) mode, if supported by your SIM
card, allows you to restrict your outgoing calls to a limited set
of phone numbers.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this
menu does not display.
Change PIN2
(Menu 5.6.8)
The Change PIN2 feature allows you to change your current
PIN2 to a new one. You must enter the current PIN2 before
you can specify a new one.
Once you have entered a new PIN2, you are asked to confirm
it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this
menu does not display.
Summary of Contents for SGH-P716
Page 6: ...Table of Contents 6 ...
