87
S
Se
ettttiin
ng
gss
3. Press the
Remove
soft key.
The phone sends your settings to the network and the
network’s acknowledgement is displayed.
You can also deactivate all call forwarding settings by
selecting the
Cancel All
option.
Note
: When all calls are forwarded, one of the
indicators below is displayed on the last line of the
display,if supported by your SIM card.
Forward Line 1
: all calls from line 1 are
forwarded.
Forward Line 2
: all calls from line 2 are forwarded.
Forward All
: all calls from lines 1 and 2 are
forwarded.
Call Barring
The call barring network service allows you to restrict
your calls.
Call barring can be set up in the following ways.
All outgoing:
calls cannot be made.
International:
international calls cannot be made.
International except to home:
when abroad, calls can
be made only to numbers within the current country and
to your home country, that is the country where your
home network provider is located.
All Incoming:
calls cannot be received.
Incoming while abroad:
calls cannot be received
when you are using your phone outside your home
service area.
Cancel All:
all call barring settings are deactivated; calls
can be made and received normally.
86
S
Se
ettttiin
ng
gss
To set your call forwarding options, proceed as
follows.
1. Select the type of call forwarding required by
pressing
or
until the appropriate
option is highlighted, and then press the
Select
soft key.
2. Select the type of calls to be forwarded by
pressing
or
until the appropriate
option is highlighted and then press the
Select
soft key.
3. Press the
Activate
soft key to confirm your settings.
4. Enter the number to which the calls are to be
forwarded.
To enter the international code, press and hold
0
until the + sign is displayed. You can also select a
number in the phonebook or the voice server
number, by pressing the
Options
soft key,
followed by
PhoneBook
or
Voice Server
Number
.
5. When you are satisfied, press
or the
OK
soft
key.
The phone sends your setting to the network and
the network’s acknowledgement is displayed.
To deactivate specific call forwarding settings,
proceed as follows.
1. Select the call forwarding option to be
deactivated.
2. Select the type of call to which this option applies.