Samsung SGH-I257M, User Manual

Page: 194 / 201

182
installation; if this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
•
Reorient/relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Warning! At very high volumes, prolonged listening to a headset
can damage your hearing.
Specific Absorption Rates (SAR) for Wireless
Phones
The SAR is a value that corresponds to the relative amount of
RF energy absorbed in the head of a user of a wireless
handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how
much RF the phone emits. All phone models are tested at their
highest value in strict laboratory settings. But when in
operation, the SAR of a phone can be substantially less than
the level reported to Industry Canada. This is because of a
variety of factors including its proximity to a base station
antenna, phone design and other factors. What is important to
remember is that each phone meets strict federal guidelines.
Variations in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates
a substantial margin of safety. As stated above, variations in
SAR values between different model phones do not mean
variations in safety. SAR values at or below the federal
standard of 1.6 W/kg are considered safe for use by the
public.
The highest reported SAR values for the I257M are:
Head: 0.82 W/kg
Body: 1.02 W/kg
This phone has been tested and meets RF exposure
guidelines when used with an accessory that contains no
metal and that positions the mobile device a minimum of
1.0 cm from the body.