SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-4
This Document can not be used without Samsung's authorization
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
1) When LCD CONNECTOR FPCB and
VOLUME KEY FPCB are
separated from the front , Be careful not to damage!
1) Be careful not to make scratch and molding damage!
2) Be careful not to be torn the dust prevention tape.
3) Be careful not to damage LCD FPCB!
1) Unscrew the REAR at the four points.
1
1) Break both side hooks in rear and
disassemble the rear from front like the
figure.
2
3
1) Disassemble the LCD CONNECTOR
2)Disassemble the VOL KEY and CAMERA KEY
FPCB from the FRONT ASS'Y using a
pincette.
3) Disassemble the PBA from the FRONT ASS'Y.
4) Disassemble the Keypad.
4
1) remove the dust prevention tape.
2) P u s h i n t h e H i n g e u s i n g t h e s t i c k
a n d d i s a s s e m b l e t h e F r o n t .
5-3. Disassembly and Assembly Instructions
―
Disassembly
