Changing Your Settings 57
• Français
• Español
4.
Touch
to return to Phone settings page.
Vibration Feedback
You can set the level of vibration intensity that occurs when you
touch the screen.
1.
From Idle mode, touch
➔
Settings
➔
Phone
➔
Vibration Feedback
.
2.
Drag the
Vibration Intensity
slider to the intensity level you
desire (range is 0-4).
3.
Touch
Save
.
Calibration
The Calibration feature allows you to re-align the screen’s touch
accuracy. Use this feature only when the device does not respond
properly when you touch the screen.
1.
From Idle mode, touch
➔
Settings
➔
Phone
➔
Calibration
.
2.
Touch the center of each target and repeat this step for all
four targets displayed.
3.
Touch
OK
from the
New settings have been saved
display
page.
Note:
When touching the screen in Calibration mode, you must touch the
center of the cross hair area.
Motion Detection
The Motion Detection feature can be used for muting an
incoming call or alarm, setting Snooze on an alarm, and starting
and restarting a timer.
1.
From Idle mode, touch
➔
Settings
➔
Phone
➔
Motion Detection
.
2.
Touch
On
to activate the Motion Detection feature, or touch
Off
to deactivate it.
For more information on using Motion Detection on your phone,
see the following:
•
To mute the ringer - see
“Other Answering Options”
on page 29.
•
To mute an alarm - see
“Turning Off an Alarm”
on page 134.
•
To start or restart a timer - see
“Timer”
on page 139.
Auto Keypad Lock
The Auto Keypad Lock feature locks your phone when the
Backlight turns off. Press the
key to unlock the keypad.
LOCK
a887 Infinity.book Page 57 Friday, July 10, 2009 1:34 PM
