Disassembly and Reassembly
6-17
Samsung Electronics
5. Push up the bottom of the Paper empty sensor
and take it out.
Note:
When you reassemble the Sheet cover, insert
one end of the sensor in place and push until
you hear a click, then push the other end.
4. Take out the Sheet sensor. Put a flat blade screw
driver or something under the sensor through
the hole on the right side of the machine and
push it up.
3. Press the release switch located on the right side.
Figure 6.49
Figure 6.51
Figure 6.52
Figure 6.50
Paper Empty
Sensor
Sheet cover
