manualshive.com logo in svg

Samsung SF4000, Operator'S Manual, Page: 99 / 125

Share
Download
Samsung SF4000 Operator'S Manual Download Page 99

C h a p t e r     S e v e n

C

ARE  AND  

M

AINTENANCE

C

HAPTER   

S

EVEN  :   

C

ARE   AND   

M

AINTENANCE

7

.1

Cleaning the Document Scanner  

To keep your machine working properly, occasionally clean the white roller, ADF rubber,
and the scanning glass. If they are dirty, documents sent to another fax machine wonÕt be
clear. 

Note : Do not turn the power off to clean the scanner, as documents stored in memory
will be lost. 

1. Open the control panel. 

2. Disassemble the white roller as follows:

Both ends of the white roller have
bushings that are snapped shut with
small tabs, as shown. Push each tab
slightly inward (A) then rotate the
roller (B) until it reaches the slot.
Then pull the roller upward. 

Bushing

A

B

3. Wipe the roller surface with a soft cloth

dampened with water. 

White roller

B-Chapter 7(US)  4/16/98 8:43 AM  Page 7.1

Summary of Contents for SF4000






























































































































Reviews:

No comments