Samsung SF-330 Series Operating Instructions Manual Download Page 10

Page: 10 / 64

1.6

The following print media can be used with your machine:

Making a copy

If you want to save ink while copying or receiving a fax, see "Copying/receiving in Ink Save mode" on page 1.8.

Turn the page face down and insert it into the document feeder.

Adjust the document guide to match the width of the document.

Feed the document into the machine.

Adjust the resolution by pressing

Resolution

• In case you selected the Standard, it automatically changes to Fine mode.

Press

Copy

• The display shows

Number Of Copies

Enter the number of copies you want, and press

Start/Enter

• The display shows

Zoom Rate

• If you want one copy without speciﬁc copy options, you can press

Copy

again at this time, and copying will start

immediately.

Select the zoom rate you want by pressing < or >, and then press

Start/Enter

• You can scale the document from 50% to 150% by selecting a pre-deﬁned rate. The default rate is 97%.

Choose if you want to collate document.

• When collation is selected, you need to select the sorting order; Normal, Reverse.

Press

Start/Enter

when all options have been selected.

• When the machine runs out of paper,

Load paper and press Start/Enter

appears in the display. Supply

additional paper and press

Start/Enter

Setting date and time

The current date and time are shown in the display when the machine is on and ready for use (Standby Mode).

The date and time will be printed on all faxes you send.

Press

Menu

Press < or > to choose

SET DATE & TIME

and press

Start/Enter

Press

Start/Enter

when the display shows

Date Format

Press < or > to select either

Europe

USA

and press

Start/Enter

Press

Start/Enter

when the display shows

Date & Time

Paper size

Dimensions

Paper weight

210mm x 297mm (8.3” x 11.7”)

70 ~ 90g/m

(20 ~ 24lbs)

Letter

216mm x 279mm (8.5” x 11.0”)

Legal

216mm x 356mm (8.5” x 14.0”)

Document
Guide

Summary of Contents for SF-330 Series

































































Search results

Summary of Contents for SF-330 Series

Reviews:

Related manuals for SF-330 Series

Brands by name

Popular brands

Samsung SF-330 Series, Operating Instructions Manual

Search results

Summary of Contents for SF-330 Series

Reviews:

Related manuals for SF-330 Series

Brands by name

Popular brands