Samsung SDS-P4080 User Manual Download

Page: 86 / 135

86_

Web Viewer

connected dVr

This displays the IP address and the status of the connecting DVR.

Connection failure message

No Response

: Appears when the DVR does not respond.

Access Denied

: Appears when the maximum number of users is exceeded.

The number of simultaneous connections are limited to 10.

Setting the display of the oSd time information

Select <

dVr time

> or <

Pc time

> for the OSD time information display

setting.

•

dVr time

: Based on the time of the connected DVR

•

Pc time

: Based on the time of the PC currently running the Web Viewer.

•

Audio

: Sound On/Off

changing the live Screen Mode

16-split mode does not support “

SEQUENCE

”, “

” and “

”.

•

SeQuence

: When this button is clicked, screens are switched at a

preset interval.

In SINGLE MODE, the channel numbers are sequentially switched from

1 to 16.

In QUAD MODE, the screens are changed like 1st 4 channels (1~4)



2nd 4 channels (5~8)



3rd 4 channels (9~12)



4th 4 channels

(13~16).

In NINE MODE, the screens are changed from 9 channels (1~9) to 7

channels (10~16).

Preset interval (10 seconds)

•

: When this button is clicked, the previous screen appears.

In SINGLE MODE, the channel numbers are switched in reverse order.

In QUAD MODE, the screens are changed like 1st 4 channels (1~4)



2nd 4 channels (13~16)



3rd 4 channels (9~12)



4th 4 channels (5~8).

In NINE MODE, the screens are changed from 9 channels (1~9) to 7

channels (10~16).

Summary of Contents for SDS-P4080








































































































































Search results

Summary of Contents for SDS-P4080

Reviews:

Related manuals for SDS-P4080

Brands by name

Popular brands

Samsung SDS-P4080, User Manual

Search results

Summary of Contents for SDS-P4080

Reviews:

Related manuals for SDS-P4080

Brands by name

Popular brands