Samsung SDS-P4080 User Manual Download

Page: 82 / 135

82_

Web Viewer

•

If Microsoft Silverlight plug-in is already installed

Use a web browser to connect to the DVR.

If Silverlight plug-in is already installed, you will see the

screen as shown.

If this is the case, perform Step 3 [

tcP port & Web

Viewer port settings

] below.

If the screen above does not appear, check if the DVR set is connected properly with a valid IP address.

uSIng lIVe VIeWer (MAc)

The Live Viewer screen consists of following :

This displays the IP address and the model name of the connected DVR.

These menus consist of <

lIVe

>, <

About

These buttons are used for the screen split and full screen mode. (Max. : 9CH)

Shows the IP address and model name of the connected DVR.

Select to turn the sound on/off.

Select <

dVr time

> or <

Pc time

> for the OSD time information display setting of the Live Viewer.

These buttons are used for sequence and changing the screen channel.

These buttons are used for capture, print, and save the image.

When you can’t play the file recorded in web, install the H.264 CODEC

ex) MAC: perian_1.2.3.dmg (http://perian.org)

Shows the channel of the connected DVR.

These buttons are used for PTZ related functions.

This displays the screen for connected camera with DVR.

c
d
e

g
h

Summary of Contents for SDS-P4080








































































































































Search results

Summary of Contents for SDS-P4080

Reviews:

Related manuals for SDS-P4080

Brands by name

Popular brands

Samsung SDS-P4080, User Manual

Search results

Summary of Contents for SDS-P4080

Reviews:

Related manuals for SDS-P4080

Brands by name

Popular brands