62_
main menu
main menu
Connecting and Setting the network
Networking may differ from the connection method, check your environment before setting the connection mode.
When no router is used
•
Static iP mode
- Internet connection : Static IP ADSL, leased line, and LAN
environments allows connection between the DVR and
remote user.
- DVR Network Settings : Set the <
Connection mode
> in
<
Connection
> menu of the connected DVR to <
Static iP
>.
`
Consult your network manager for IP, Gateway and Subnet Mask.
•
Dynamic iP (DHCP) mode
- Internet connection : Connect the DVR directly to a cable
modem, DHCP ADSL modem or FTTH network.
- DVR Network Settings : Set the <
Connection mode
> in <
Connection
> menu of the connected DVR to
<
Dynamic iP
>.
•
aDSL (PPPoe: iD and password certification)
- Internet connection : An ADSL modem is directly connected
to the DVR, where the ADSL connection requires user ID
and password.
- DVR Network Settings : Set the <
Connection mode
> in
<
Connection
> menu of the connected DVR to <
aDSL
>.
`
<
User ID
> and <
Password
> should be the same to the ADSL
user information.
If you don’t know the ID and password, consult your ADSL service
provider.
Connection Mode
Connection
Protocol
Connection Mode
Static IP
Bandwidth
2Mbps
OK
Cancel
IP
192.168.1.200
Gateway
192.168.1.1
Subnet Mask
255.255.255.0
DNS
Manual
168.126.63.1
Connection Mode
Connection
Protocol
Connection Mode
ADSL
Bandwidth
600kbps
OK
Cancel
IP
192.168.1.200
Gateway
192.168.1.1
Subnet Mask
255.255.255.0
DNS
Manual
168.126.63.1
User ID
ID
Password
************