Samsung SDE-500X, User Manual

Page: 60 / 152

60_ main menu
main menu
•
Screen Setup : The video appeared on the screen may vary
depending on the channel’s camera, configure the DVR
display to your preferences.
Select a channel and adjust the <
(Brightness) >,
< (Contrast) >, and < (Color) > of the selected channel.

Press the < Init > to initialize settings back to the default 50.
•
Privacy Region : You can specify a certain area of the
camera video to be protected for your privacy.

The < Privacy Region > is supported by SDE-4003/5003 only.
6. When the camera setup is done, press < OK >.
To set the privacy region

Select < Privacy Region >.

When “ Privacy Region ” window appears, select a
channel for detection and set the area of motion
detection.
•
To set the area in “ Privacy Region ” window
In the “ Privacy Region ” window, select desired region
from < >.
•
Privacy Region
You can specify up to 4 privacy zones for each channel,
which can be identified by the color.
1 Purple 2 Green 3 Blue 4 Yellow
•
To set the area using < Individual > selection
Privacy Region
OK Cancel
Apply to All CH
CH1
Privacy Region1
Individual
When selected < Individual >, “ Privacy Region ” window disappears and you can select cells one by one.
When the motion area setup is done, Right-click to select < Menu > in the context menu or the [ MENU ]
button on the remote control to display the “ Privacy Region ” window again.
- Clear All : Selected cell is removed from the Privacy Region.
- Menu : After selecting individual motion areas, move to the “ Privacy Region ”
window.

If selected < Apply to All CH >, selected motion area is applied to all channels.

When completing the privacy zone settings, click < OK >.
Clear All
Menu
Screen Setup
Init Apply to All CH CH1 50 50 50
OK Cancel