COLOR CCD CAMERA
COLOR CCD CAMERA
User’s Manual
User’s Manual
13
12
Installation
Please take off the CCD protection cap and
attach the C-Mount lens to the camera by
screwing it in clockwise.
C-mount adaptor
When using a C-Mount lens
When using a CS-Mount lens
1. Please take off the CCD protection cap
and C-mount adaptor.
2. Please attach the CS-Mount lens to the
camera by screwing it in clockwise.
C-mount adaptor
CCD protection cap
• Please use the specified lens connection parts as shown in the picture below.
The use of the wrong sized parts of the wrong size may cause damage to the
inside of the camera or result in poor fitting.
• Use of a lens which is too heavy affects the balance of the camera and may
cause a malfunction. Please use a lens that weighs less than 450g.
• Please select Av mode if possible when adjusting the automatic light control
(ALC) of an auto lens. Use of PK mode may cause hunting.
Notes
C-mount lens : 10 mm or less
CS-mount lens : 5 mm or less
CS-mount adaptor
Connecting to a monitor
Please connect the video output terminal
located on the back of the camera to the
monitor.
• The connection method varies depending on the type of monitor and accessories. Please
refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and select
75Ω for the Intermediate device as shown in the picture below.
CCD Camera
Intermediate
End monitor
CCD Camera
Monitor
Connecting to power
Each model has a different power input specification.
Please check the model type and standard power requirement before connecting to power.
Use AC24V, 300mA adaptor
For SDC-415NA/SDC-415PA.
Use AC230V, 50Hz power source
For SDC-415PH.
Use DC12V, 500mA adaptor
For SDC-415ND/SDC-415PD.
AC Power Type (AC 24V, 300mA)
High Voltage Type (AC230V, 50Hz)
DC Power Type (DC 12V, 500mA)
