COLOR CCD CAMERA
User’s Manual
19
COLOR CCD CAMERA
User’s Manual
18
※
Please select one of the 3 modes below.
➲
ATW(Auto Tracking White Balance) :
This mode can be used within the color
temperature range 1,800°K ~ 10,500°K (Ex. fluorescent light, outdoor, sodium vapor
lamp or inside tunnels)
➲
AWC(Auto White Balance Control) :
Please press the SETUP button while the
camera is directed at a piece of white paper to obtain the optimum state under current
illumination. If the environment including the light source is changed, you have to
adjust the white balance again.
➲
MANUAL :
The manual adjustment mode enables finer adjustment.
Please select ATW or AWC first. Please change to manual adjustment mode and press
the SETUP button. Please set the appropriate color temperature, and then increase or
decrease the red and blue color values while monitoring the color changes on the object.
• Under the following conditions the WHITE BALANCE function may not operate properly. In
such cases, please select the AWC mode.
❶
When the object´s surroundings have a very high color temperature (Ex. a clear sky and sunset)
❷
When the object´s surroundings are dark
❸
If the camera directly faces a fluorescent light or is installed in a place where there are
considerable changes in illumination, the WHITE BALANCE function may become unstable.
Notes
Camera Operation
BACKLIGHT (Backlight Compensation)
AGC (Auto Gain Control)
When there is a strong backlight behind the object, clear images of the background as
well as the object can still be obtained by using the BACKLIGHT function.
1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by using the UP
and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
➲
HIGH/MIDDLE/LOW :
You can adjust the sensitivity of BLC and
BLC window´s size and position. So that, It can
achieve BLC function efficiently regardless of
position of subject.
➲
OFF :
BLC function doesn´t operate.
BACKLIGHT ON
BACKLIGHT OFF
The higher gain level, the screen gets brighter and the level of noise also increases.
The BRIGHTNESS can be adjusted within the range of 1~70
1. Please position the arrow to point to 'AGC' on the SETUP menu by using the UP and
DOWN buttons.
2. Select a desired mode using the Up and Down buttons.
➲
HIGH
:
The gain increases or decreases within the range of 6dB ~ 34dB.
➲
MIDDLE :
The gain increases or decreases within the range of 6dB ~ 30dB.
