Samsung SDC-313B, User Manual

Page: 19 / 21

COLOR CCD CAMERA User’s Manual
36
COLOR CCD CAMERA User’s Manual
37
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact an authorized
technician.
Troubleshooting
Problem Solution
Nothingappearson
thescreen. • Please check the power connection.
• Please check the video signal line connection.
• Please check and make sure that the auto lens switch
is set to DC (VIDEO) when using a DC (VIDEO) lens.
• Please check the Brightness of Auto Iris lens.
Thevideoimageis
notclear.
• Please check if the lens is clean.
Please clean the lens with a clean cloth or brush.
• Please adjust the contrast feature of the monitor.
• Please make sure that the screen is not exposed
directly to a bright light.
Please move the camera if necessary.
• Please readjust the back focus of the camera.
Thescreenisdark. • Please adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/ Hi-z
properly, and check the terminals. (refer to page 18)
• Please check if an auto iris lens is being used and
adjust the brightness level.
Thereisaproblemwiththe
cameraoperation.The
camerasurfaceistoohotand
blackstripesappearonthe
screen.
• Please check if an appropriate power source to the
camera complies with the manufacturer's standard
requirement, or if the voltage keeps changing.
Problem Solution
TheMOTIONDETECTION
functionisnotworking.
• Please check if 'MOTION DETECTION' mode is turned
on.
• Please check if the MD LEVEL is too low.
• Please check the setting of the MD AREA.
Colorsarenotquiteright. • Please check the 'WHITE BAL' setting. (Please refer to
page 25)
Thescreenisflickering. • Please check if the camera is facing directly into
sunlight or fluorescent light.
• Please check if an auto iris lens is being used.
• Please check the connection of the lens connector
cable.
L/Lmodeisn'tabletobe
selected.
• Have you connected your camera to DC power source?
Connect it to AC power source.
COLOR(DAY&NIGHT)mode
isnotworking.
• Please check if the AGC menu is set to the OFF
position.
SENS-UPfunctionisnot
working.
• Please check if the AGC menu is set to the OFF
position.
• Please check if the SHUTTER menu is set to MANUAL
mode.
• Please check the limit of Sens-UP AUTO mode.