Samsung SCX-340x Series Page 89 Service Manual Download

Page: 89 / 129

4. Alignment and Troubleshooting

4.1.8. Tech Mode

In service (tech) mode, the technician can check the machine and perform various test to isolate the cause of a malfunction.
While in Tech mode, the machine still performs all normal operations.

4.1.8.1. Tech mode (4 in 1 model)

a) Entering Tech mode

1) Press

“Menu > # > 1 > 9 > 3 > 4”

on the control panel continuously.

2) Press

Menu

3) Select “

Tech Mode

”.

b) Tech mode menu

NOTE

This function does not supported for SCX-340x/SCX- 340xW Series.

Depth 1

Depth 2

Depth 3

Send Level

[9-15]

DTMF Level

High [0-15]

Pause Time

[1-9]

Dial Mode

Tone, Pulse

Modem Speed

33.6, 28.8, 14.4, 12.0, 9.6, 4.8

Error Rate

5%, 10%

Clear All Mem.

Toner Low Level

[1:30]:10

Clear Count

Engine Footer

Off, On

Dial Tone

Off, On

Data Setup

Caller ID

Off, On

Switch Test

Modem Test

Dram Test

Rom Test

Shading Test

Machine Test

Scan Aging

4-23

Summary of Contents for SCX-340x Series
































































































































Search results

Summary of Contents for SCX-340x Series

Reviews:

Related manuals for SCX-340x Series

Brands by name

Popular brands

Samsung SCX-340x Series, Service Manual

Search results

Summary of Contents for SCX-340x Series

Reviews:

Related manuals for SCX-340x Series

Brands by name

Popular brands