Samsung SCX-340x Series Service Manual Download Page 93

Page: 93 / 129

4. Alignment and Troubleshooting

4.1.8.2. Tech Mode (3 in 1 model)

a) Entering Tech mode

In order to enter tech mode, please press button step by step as follows:

•

Up > Up > Stop > Down > Down > Stop > Stop

Machine displays “UC” in 7 segment area in tech mode.

NOTE

•

Button interval is 2 second under.

•

If Stop button is pressed in tech mode, machine returns user mode.

•

When machine is power off and then on, machine returns user mode.

•

Any key was not pressed in tech mode during 30 seconds, machine return user mode.
(Time is depend on machine timeout)

•

You can’t enter tech mode when machine is working (e.g. printing/scanning/coping)

•

Machine will not enter sleep mode in tech mode

b) Tech mode menu

LCD Display

Description

Print usage counter report (UC)

Print Shading Report (Report prints out after shading)

Print Supplies Info Report

Print Event Log

Print All Reports

•

Shading is not work, just print out with current shading data

•

Exception Report is not printed

Executes Scanner Aging (If cancel button is pressed, then aging is finished)

4-27

Summary of Contents for SCX-340x Series
































































































































Search results

Summary of Contents for SCX-340x Series

Reviews:

Samsung SCX-340x Series, Service Manual, Page: 93 / 129

Search results

Summary of Contents for SCX-340x Series

Reviews: