manualshive.com logo in svg

Samsung SCX-1100, Service Manual

Share
Download
Samsung SCX-1100 Service Manual Download Page 28

4-6

Troubleshooting

Samsung Electronics

4-3-3  Defective Operation (LCD WINDOW            ) Display

4-3-4  No Power

• Description

• Location

1.OPE ASS'Y

2.Connection between the Main B'D and OPE ASS'Y

3.Main B'D.

Strange characters are displayed on the OPE Panel and buttons are not operated.

Check and Cause

Solution

1. Clear the memory.

2. Check if OPE HARNESS is connected to the Main

Board correctly.

1. Try again after clearing the memory.

2. After confirming that OPE HARNESS is connected to

the Main Board correctly, if it is so, then replace the
OPE ASS'Y and Main Board in sequence.

• Description

• Location

1.Power code        2.Connection between the Main B'D and Power HARNESS  
3.Power ASS'Y

4.Main B'D.                 5.OPE Ass’y

While the power S/W is turned on, it does not work at all.

Check and Cause

Solution

1. Check if the connection of power code is normal.

2. Check if DC +3.3V and +30V is supplied to POWER

ASS'Y from MAIN B'd.

3. Check if POWER DOWN KEY in OPE ASS'Y is

working regularly. 

1. Try to replace the power code.

2. If all the connections are correct, try to replace the

power ASS'Y and the Main B/D in sequence. 
( +3.3V and +30V is supplied to POWER ASS'Y from
MAIN B'd)

3. Replace OPE ASS'Y

Summary of Contents for SCX-1100














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands