3.13
Copying
Changing Default Settings
The copy options including copy quality, contrast, number of copies
and copy size can be set to the most frequently used modes. When
a document is copied, the default settings will be activated unless
otherwise changed by using the corresponding buttons on the
operation panel.
To create your own default settings:
1
Press Setup.
2
Press the Scroll buttons (
or
) until you see
“MAINTENANCE” on the display, then press Enter.
3
Press the Scroll buttons (
or
) until you see “DEFAULT
SETUP” on the display, then press Enter. The first setup menu
“CONTRAST” appears.
4
Use the Scroll buttons (
or
) to scroll through the setup
menu available.
5
When the desired menu appears, press Enter to access the
menu.
6
Change settings using the Scroll buttons (
or
) and then
press Enter to save the selection.
7
Repeat steps 4 through 6 as necessary.
8
To return to Standby mode, press Cancel/Reset.
N
OTE
:
When you adjust the copy settings or set special copy
options, if you press
Cancel/Reset
, the settings are cancelled and
return to their default settings.
Summary of Contents for SCX-1100
